HP 2600fx - Optical Disk Drive Command Reference Manual: Autochanger Move Error Codes

Optical drive and library for fx, ex and mx models.
Hide thumbs

Advertisement

Autochanger Move Error Codes

NOTE
These error codes ONLY apply to the model 40fx, 80ex, 125ex, and 220mx
jukeboxes.
Move Errors are reported through byte 18 of the Additional Sense Bytes
Request Sense Command (03H) in Table 5-6 on page 5-14.
Table B-9
Autochanger Move Error Codes
Error Code
(hex.)
00
02
04
06
08
0A
0E
10
12
18
1A
Appendix B
Failure Description
Failure occurred before any servo-controlled motions
were attempted during Poweron Selftest.
Failure while Picker is not moving.
Failure while moving the Carriage/Picker assembly
away from drives.
Failure while moving the Carriage/Picker assembly
toward drives.
Failure while flipping the Picker.
Failure while translating the Picker assembly.
Failure while moving the Picker fingers back in
preparation to translate.
Failure while moving the Picker fingers to engage the
cartridge from the source storage element.
Failure while moving the Picker fingers back to
remove the cartridge from the source storage element.
Failure while moving the Picker fingers forwards to
insert a cartridge in the destination storage element.
Failure while moving the Picker fingers back after
inserting a cartridge in the destination storage slot.
Autochanger Error Codes
Autochanger Move Error Codes
B-29

Advertisement

   Also See for HP 2600fx - Optical Disk Drive

   Related Manuals for HP 2600fx - Optical Disk Drive

Comments to this Manuals

Symbols: 0
Latest comments:
  • MARIAN _YONKOV Jul 08, 2013 12:55:
    DAVI PITAM NE6O KOLKO 44ESRUVA ISTALIRANE DISK HULET PAKART /ZA ISTLIRANE / PI6ETE E- MELA MARIAN_YON​KOV@ABV.BG