HP 2600fx - Optical Disk Drive Command Reference Manual: Message Reject 07h

Optical drive and library for fx, ex and mx models.
Hide thumbs

Advertisement

SCSI Command Overview
Drive Control Commands

Message Reject 07H

This message is sent from either the initiator or the target to indicate
that the last message was inappropriate or has not been implemented.
When the target receives a MESSAGE REJECT message from the
initiator, it takes the following action based on which message was
rejected.
Command
Complete
The target goes to Bus Free Phase and does not consider
this as an error.
Disconnect
The target does not disconnect and continues the cur-
rent command.
Identify
The target goes to the Bus Free Phase and aborts the
command. Sense Key/Additional Sense Code is set to
Hardware Error/Message Reject Error.
Linked Command
Complete
The target goes to the BUS FREE phase and aborts the
command and sets Sense Key/Additional Sense Code to
Aborted Command/Message Error.
Message
Reject
The target terminates the command with Check Condi-
tion status and sets the Sense Key/Additional Sense
Code to Hardware Error/Message Reject Error.
Restore
Pointers
The target goes to the Bus Free Phase and sets the
Sense Key/Additional Sense Code according to the error
condition.
Save Data
Pointers
The target does not disconnect and continues the cur-
rent command.
1-10
Chapter 1

Advertisement

   Also See for HP 2600fx - Optical Disk Drive

   Related Manuals for HP 2600fx - Optical Disk Drive

Comments to this Manuals

Symbols: 0
Latest comments:
  • MARIAN _YONKOV Jul 08, 2013 12:55:
    DAVI PITAM NE6O KOLKO 44ESRUVA ISTALIRANE DISK HULET PAKART /ZA ISTLIRANE / PI6ETE E- MELA MARIAN_YON​KOV@ABV.BG