HP 2600fx - Optical Disk Drive Command Reference Manual page 353

Table D-1
Micro/Macro-Moves
HP Surestore Optical Micro-Move IDs
HP Surestore Optical Micro-Move ID Table
(For all models, EXCEPT 40fx, 80ex, 125ex and 220mx)
Move ID Description
(hex.)
8E Move picker plunge assembly out to rearm the picker
mechanism before switching active picker.
8F Retract picker plunge assembly to a point just short of
tripping the thumb selection mechanism. First of two
steps (second step is micro-move 90).
90 Retract picker fingers all the way back. Trips the
mechanism that makes the opposite thumb "active."
91 Move picker plunge assembly forward, away from the full
retracted position. Clears the tripping mechanism and
makes the new thumb "active."
92 Plunge picker diagnostic 1 (factory use only).
93 Plunge picker diagnostic 2 (factory use only).
94 Plunge picker diagnostic 3 (factory use only).
95 Plunge picker diagnostic 4 (factory use only).
96 Plunge picker back 1 (not used).
97 Plunge picker back 2 (not used).
98 Plunge find handoff distance 1 (factory use only).
99 Plunge find handoff distance 2 (factory use only).
9A Plunge find handoff distance 3 (factory use only).
9B Plunge find flip distance 1 (factory use only).
9C Plunge find flip distance 2 (factory use only).
9D Plunge find picker length (factory use only).
9E Plunge picker state 1 (factory use only).
9F Plunge picker state 2 (factory use only).
D-8 Appendix D