HP 2600fx - Optical Disk Drive Command Reference Manual: Seek (group 0) Command (0bh)

Optical drive and library for fx, ex and mx models.
Hide thumbs

Advertisement

Seek (Group 0) Command (0BH)

This command seeks the optical head to the physical track where the
specified logical block exists.
Table 2-19
Seek (Group 0) Command CDB
PBA
When this command is used with 512 byte/sector 4X/ 8X/14X media, 1024
NOTE
byte/sector 8X/14X media, or 2048 14X media, it is not possible to address
all logical blocks on the disk because those media types contain >2
logical blocks.
When this command is used with 14X 512 or 1024 byte/sector media,
NOTE
setting the PBA bit will cause the drive to return a CHECK CONDITION
status. The sense key/additional sense code will be set to ILLEGAL
REQUEST/INVALID FIELD in CDB.
Chapter 2
Byte
7
6
0
1
Logical Unit Number
(0)
2
3
4
5
PBA
A Physical Block Address bit of 1 indicates that physical
block addressing is used.
A PBA bit of 0 indicates that logical block addressing is
used.
Seek (Group 0) Command (0BH)
5
4
3
Operation Code (0BH)
Logical Block Address (MSByte)
Logical Block Address
Logical Block Address (LSByte)
Reserved (0)
Reserved (0)
SCSI-2 Drive Command Set
2
1
0
Flag
Link
21
2-25

Advertisement

   Also See for HP 2600fx - Optical Disk Drive

   Related Manuals for HP 2600fx - Optical Disk Drive

Comments to this Manuals

Symbols: 0
Latest comments:
  • MARIAN _YONKOV Jul 08, 2013 12:55:
    DAVI PITAM NE6O KOLKO 44ESRUVA ISTALIRANE DISK HULET PAKART /ZA ISTLIRANE / PI6ETE E- MELA MARIAN_YON​KOV@ABV.BG