MACROMEDIA DIRECTOR MX-USING DIRECTOR MX Use Manual page 584

To determine how the player code is included in the projector, select an option for Player.
9
includes the uncompressed player code in the projector file. This option starts the
Standard
movie faster than other options but creates the largest projector file.
includes a compressed version of the player code in the projector file. This
Compressed
substantially reduces the projector file size, but decompressing the player code adds a few
seconds to the startup time of a movie.
makes the projector use the Shockwave player installed in a user's system instead of
Shockwave
including the player code in the projector file. If the Shockwave player is not available when
the movie runs, the movie prompts the user to download it.
For more about these options, see "About distribution formats" on page 574.
(Macintosh only) To make Director use available system memory when its own partition is
10
full, select Use System Temporary Memory.
Once all projector options are set, click OK.
11
Click Create in the Projector dialog box and then enter a name and location for the projector.
12
To avoid problems with linked media, create the new projector in its final folder location and
do not move it to a different folder.
Director turns the movies, casts, and included Xtra extensions into a single projector.
To create a fast-start projector:
Create a new folder on your computer desktop.
1
It does not matter what you name the folder.
In Director, select Modify > Movie: Xtras.
2
The Xtras dialog box appears.
Select the name of each Xtra and deselect Include in Projector for each, then click OK.
3
Select File > Save and Compact.
4
If you are adding multiple movies to the package, repeat steps 2 through 4 for each of
the movies.
Select File > Create Projector.
5
In the Create Projector dialog box, select the movies to include in the projector and click Add.
6
Click Options and do one of the following:
7
•
Select Shockwave (Windows) and click OK.
•
Select Standard (Macintosh) and click OK.
In the Create Projector dialog box, click Create.
8
In the dialog box that appears, type a name for the projector. If necessary, use the pop-up menu
9
to browse to the desktop folder you created in step 1, and then click Save.
Exit Director and return to your computer desktop.
10
Open the folder you created in step 1. Create a subfolder within this folder and name it Xtras.
11
584 Chapter 26