Changing The Order Of Attached Behaviors - MACROMEDIA DIRECTOR MX-USING DIRECTOR MX Use Manual

Select a behavior from the Behaviors pop-up menu.
3
Director attaches the behavior you select to the sprite(s) or frame(s).
Note: Some behaviors work only when applied to either a sprite or a frame; for more information, read the
behavior descriptions.
To change parameters for a behavior attached to a sprite or frame:
Select the sprite or frame to which the behavior is attached.
1
In the Behavior tab of the Property inspector, use the pop-up menus or text fields to change
2
any parameters.
The Behavior tab has the same fields for the behavior as those in the Parameters dialog box.

Changing the order of attached behaviors

Director executes behaviors in the order they were attached to a sprite, and they are listed in this
order in the Property inspector and Behavior inspector. It's sometimes necessary to change the
sequence of behaviors so that actions occur in the proper order.
To change the order of the behaviors attached to a sprite:
Select the sprite in the Score or on the Stage.
1
Open the Behavior inspector or click the Behavior tab in the Property inspector.
2
Select a behavior from the list.
3
Click the arrows in the toolbar to move the selected behavior up or down on the list.
4
360 Chapter 14