MACROMEDIA DIRECTOR MX-USING DIRECTOR MX Use Manual page 129

To create a new cast:
Do one of the following:
1
•
Select File > New > Cast.
•
Select Modify > Movie > Casts to open the Movie Casts dialog box, and click the New button.
•
In the Cast window, click the Cast button and select New Cast from the pop-up menu. (See
"Using Cast window controls" on page 134.)
In the New Cast dialog box, type a name for the new cast.
2
Specify how to store the cast:
3
stores the cast within the movie file. This option makes the cast available only to the
Internal
current movie.
stores the cast in a separate file outside the movie file. This option makes the cast
External
available for sharing with other movies. For information about internal and external casts, see
"Managing external casts" on page 153.
If you chose External and you don't want to use the cast in the current movie, deselect the Use
4
in Current Movie option.
Note: You can link the external cast to your movie later. See "Managing external casts" on page 153.
Click Create.
5
The cast is created and appears as a tabbed panel in the Cast window.
Note: Creating a new cast by selecting Modify > Movie > Casts does not automatically display a tabbed panel. To
display the tabbed panel, click the Cast button and select the cast you created from the pop-up menu.
If you created an external cast, select File > Save while its Cast window is active, and then save
6
the cast in the desired directory.
Cast button
Cast Members and Cast Windows 129