MACROMEDIA DIRECTOR MX-USING DIRECTOR MX Use Manual page 116

Add a trigger for the Pan Camera Vertical action
Again, you must associate triggers with the action. First, you will specify a trigger to pan the
camera upward.
Drag the Keyboard Input behavior from the Cast window to the Magic trick sprite on
1
the Stage.
In the Parameters for Keyboard Input dialog box, specify the following:
2
•
In the Which Key Will Be Used pop-up menu, select Up Arrow.
•
Verify that the second text box is blank and that No Modifier Key appears in the third text box.
•
Confirm that Group Pan – Pan Camera Up appears in the Select a Group and Its Action
pop-up menu. Then click OK.
Add the panning trigger for the opposite direction
You can probably guess how to establish downward panning:
Again, drag the Keyboard Input behavior from the Cast window to the Magic trick sprite.
1
In the Parameters for Keyboard Input dialog box, specify the following:
2
•
In the Which Key Will Be Used pop-up menu, select Down Arrow.
•
As before, verify that the second text box is blank and that No Modifier Key appears in the
third text box.
•
In the Select a Group and Its Action pop-up menu, select Pan – Pan Camera Down. Then
click OK.
116 Chapter 3