MACROMEDIA DIRECTOR MX-USING DIRECTOR MX Use Manual page 363

Click the arrow in the lower left of the Behavior inspector to expand the editing pane.
2
Click here to expand the editing pane
The editing pane shows the events and actions in the current behavior. If you're creating a new
behavior, no events or actions appear.
•
To add a new event or action group to the behavior, select an event from the Events pop-up
menu and then select actions for the event from the Actions pop-up menu.
You can choose as many actions as you need for a single event.
•
To change an existing event or action group, select an event from the list and then add or
remove actions in the Actions list.
•
To delete an event or action group, select the event and press Delete.
•
To change the sequence of actions in an event or action group, select an event from the Events
list, select an action from the Actions list, and then click the up and down arrows above the
Actions list to change the order of actions.
•
To lock the current selection so nothing changes in the Behavior inspector when new
sprites are selected, click the Lock Selection button in the lower left of the expanded
Behavior inspector.
If you are familiar with Lingo, you can also edit a behavior's script directly.
Events and actions in the Behavior inspector
The actions and events included with Director are basic building blocks you can use to create
simple or complex behaviors.
The Behavior inspector makes the following events available:
indicates that the mouse button was released.
Mouse Up
indicates that the mouse button was clicked.
Mouse Down
Behaviors 363