Using Flash Communication Server Mx - MACROMEDIA DIRECTOR MX-USING DIRECTOR MX Use Manual

Sending messages and closing the connection
In order to complete your script, you must finish the
sending messages from the object and closing the connection when you are finished using it.
•
To finish the
beginSprite
the
setCallback()
ActionScript command that you send to the local connection object you created.
pLocalConn.connect(pCon_name)
The argument
beginning of the script.
•
To send messages, write a handler that uses the
on sendMessage (me, aMessage)
tMessage = pCon_name && ":" && aMessage
pLocalConn.send(pOtherCon_name, "incomingMessage", tMessage)
end sendMessage
The method requires three arguments: the recipient of the message, the event to be
send()
triggered when the message is received, and the message itself.
•
To close the connection, write a handler that uses the
connection object:
on closeConnection (me)
pLocalConn.close()
end closeConnection
You can call this handler from any other handler by using the statement:
sendSprite (1, #closeConnection)
You might also use the
on endSprite (me)
pLocalConn.close()
end endSprite
Now that the local connection object is set up and it has handlers for callbacks, sending messages,
and closing the connection, it is ready to be used by the movie.

Using Flash Communication Server MX

Macromedia Flash Communication Server MX allows Flash movies on separate computers to
share information, including sound, video, text and other data in real time. You can use Flash
Communication Server MX in Director by using Flash cast members that are designed to work
with the server, or by creating
communicate with the server.
As with any Flash ActionScript object you create in Lingo, you use the exact same commands and
properties to manipulate the object as you would in ActionScript. For a detailed example, see the
previous section. The Director MX installation CD for Windows includes Flash Communication
Server MX Personal Edition, the Flash Communication Server MX authoring components for
Flash MX, and documentation. The Director MX installation CD for Macintosh includes the
Flash Communication Server MX authoring components for Flash MX and documentation. For
specific information about the
FlashCom server, refer to the Flash Communication Server MX documentation.
handler that already contains the
commands, you must add a
gives the actual connection a name, "userA", that was declared at the
pCon_name
method in an
close()
NetConnection
NetConnection
handler and write handlers for
beginSprite
newObject()
command. This is actually a Flash
connect()
method of the local connection object:
send()
method of the local
close()
handler:
endSprite
and objects in Lingo that you use to
NetStream
and objects and how to connect to the
NetStream
Using Flash and Other Interactive Media Types 309
command and all