MACROMEDIA DIRECTOR MX-USING DIRECTOR MX Use Manual page 500

Property
.toon.
whichModel
lineColor
.toon.
whichModel
silhouettes
.toon.
whichModel
creases
.toon.
whichModel
creaseAngle
whichModel .toon.
boundary
Inker modifier properties
The inker modifier adds silhouette, crease, and boundary edges to an existing model. Silhouettes
are edges along the border of a model. Crease edges are created when the angle between two areas
of the mesh exceeds a given threshold.
Use these properties to work with the inker modifier:
Property
.
whichModel
inker.lineColor
.
whichModel
inker.
silhouettes
.
whichModel
inker.creases
.inker.
model
creaseAngle
.
whichModel
inker.boundary
Subdivision surfaces modifier properties
The subdivision surfaces (SDS) modifier causes the model to be rendered with additional
geometric detail in the area of the model that the camera is currently looking at. The additional
detail must be created in a third-party modeling application and imported into Director along
with the 3D cast member. The SDS modifier is available only for models created outside of
Director. The SDS modifier should not be combined with the level of detail or toon modifier on
the same model.
500 Chapter 19
Access Description
Get and set Lingo color object describing line color
TRUE (1)
Get and set
presence or absence of lines around
silhouettes
TRUE (1)
Get and set
whether lines are drawn when mesh
boundaries meet at a crease
Get and set A floating-point value controlling crease angle
detection
Get and set TRUE (1)
whether lines are drawn at boundary of surface
Access Description
Get and set Lingo color object describing line color
TRUE (1)
Get and set
presence or absence of lines around
silhouettes
TRUE (1)
Get and set
whether lines are drawn when mesh
boundaries meet at a crease
Get and set A floating-point value controlling crease angle
detection
TRUE (1)
Get and set
whether lines are drawn at boundary of surface
FALSE (0)
or value indicating
FALSE (0)
or value indicating
or FALSE (0) value indicating
FALSE (0)
or value indicating
FALSE (0)
or value indicating
FALSE (0)
or value indicating
Default
Black
(rgb 0,0,0)
TRUE (1)
TRUE (1)
0.01
TRUE (1)
Default
Black
(rgb 0,0,0)
TRUE (1)
TRUE (1)
0.01
TRUE (1)