Charging The Battery - Contax I4R User Manual

Introduction

Charging the Battery

A Important
Ensure that the battery pack is inserted in the camera before charging.
1
Place the camera in the USB cradle.
BNote
2
Plug the AC adapter AC-73L into the USB
cradle to charge.
Charge time is approximately 3 hours.
Turn the camera off during charging.
The caution LED (red) turns on when the camera is charging, and turns
off after approximately 2 hours at which point the battery pack is 90%
charged.
Leaving the AC adapter connected for approximately one hour more
charges the battery pack fully.
A Important
• When you first purchase the camera, you need to charge the battery fully.
• If the battery pack is repeatedly charged with the battery pack or camera containing the
• Remove the camera from the USB cradle and turn the power on to check the camera
BNote
The AC adapter supports voltages of up to 240 V. When you are charging the camera in a
foreign country, use the AC adapter cable that matches the voltage and power socket of
that country. You do not need to use a voltage transformer or other devices.
Contents Glossary
Getting Ready
Refer to "Using the USB Cradle" (
details on attaching the USB cradle.
battery left in a hot location, the battery pack will deteriorate, reducing the number of
photos that can be taken. When this occurs, replace the battery pack with a new one.
battery level. ( p.33)
Index
Taking Pictures Playback
p.36) for
EN-27
Nomenclature
Set Up
BACK NEXT
Menus and Settings Troubleshooting