Connecting The Camera To The Printer - Contax I4R User Manual

Introduction
[G] Printing by Connecting the Camera
Directly to a Printer (PictBridge)
«Applicable images: Still images only»
By connecting the camera to a printer that supports PictBridge, you can
print your images quickly and simply direct from the camera. You can also
use this method to print images with DPOF settings (
that support DPOF. Refer to the Instruction Manual for your printer when
using this print method.
A Important
• Check that your printer supports PictBridge.
• Set the printer up for printing before starting this procedure. (Refer to the instruction
BNote
These settings can also be used in MULTI playback / GROUP playback modes (

Connecting the camera to the printer

1
Turn the printer on.
2
Place the camera in the USB cradle.
BNote
3
Turn the camera on and press the mode
button until "P" lights up on the mode
select LED.
4
Press the MENU button K to display the menu icons.
Contents Glossary
Getting Ready
manual for your printer.)
Refer to "Using the USB Cradle" (
details on attaching the USB cradle.
Index
Taking Pictures Playback
p.36) for
EN-125
Nomenclature
Set Up
p.120) on printers
NEXT
Menus and Settings Troubleshooting
p.87).