Viewing Movies - Contax I4R User Manual

Introduction

Viewing Movies

«Applicable images: Movies only»
While playing movies, you can pause playback, move forward one frame at
a time (frame advance) and adjust the volume.
1
Turn the camera on and press the mode
button until "P" lights up on the mode
select LED.
2
Press the 4-way button left or right to
select the movie to playback, and up or
down to adjust the volume.
BNote
3
Press the OK button E.
Movie playback begins.
The table below shows the operations that can be performed during playback.
Operation
Up
Down
Left
Contents Glossary
Getting Ready Taking Pictures
• You can also adjust the playback volume while
the movie is running.
• You can view image information before playing
back a movie. (
Increases the volume.
Decreases the volume.
Press the 4-way button once to stop the movie, and then begin scanning
backwards through the movie frame by frame each time you press the 4-
way button. Hold the 4-way button left for 1 second to scan back through
the movie at twice the playback speed.
Hold the 4-way button left for another 2 seconds to scan back through the
movie at 4 times the playback speed.
Index
Playback
p.85)
Description
EN-93
Nomenclature
Set Up
NEXT
Menus and Settings Troubleshooting
00:00
00:16