U] Protecting Images From Accidental Erasing (Protect); Protecting An Image - Contax I4R User Manual

Introduction

[U] Protecting Images from Accidental Erasing (PROTECT)

«Applicable images: Still images / movies»
This feature enables you to protect important images to ensure that they
are not inadvertently erased.
BNote
These settings can also be changed in MULTI playback / GROUP playback (
QuickView (

Protecting an image

1
Turn the camera on and press the mode
button until "P" lights up on the mode
select LED.
2
Press the MENU button K to display the menu icons.
3
Press the 4-way button left or right to
select PROTECT [U] and press the OK
button E.
4
Press the 4-way button left or right to select the image to be
protected.
5
Press the 4-way button up to select [SET],
then press the OK button E.
The [U] icon appears on protected images.
BNote
Contents Glossary
Getting Ready Taking Pictures
p.50) modes.
• To protect another image, repeat steps 4 and 5.
• In GROUP playback, all of the images in a
group of continuous shots are protected when
you protect an image from a group.
Index
Playback
EN-104
Nomenclature
Set Up
p.87) and
PROTECT
PROTECT?
SET
RETURN
NEXT
Menus and Settings Troubleshooting