Led Displays; Self-Timer Led (Red; Card Access Led (Orange; Getting Ready - Contax I4R User Manual

Introduction

LED Displays

There are 3 LEDs on the camera. The LEDs indicate the status of the
camera by either lighting or flashing.

Self-timer LED (red)

Flashes
Lights

Card access LED (orange)

Flashes
Contents Glossary

Getting Ready

Taking Pictures
While using the self-timer
When a movie is being shot
When the shutter operates and shooting has ended (does not
light for continuous shots)
When the camera is set to Playback mode
When the camera is set to SET UP mode
When the camera is connected to a PC
Flashes while the camera is accessing the memory card, such
as recording images to memory card or reading files.
Do not open the card/battery cover or remove the memory card
while the LED is flashing as this could cause data corruption or,
in some cases, camera damage.
Index
Playback
EN-23
Nomenclature
Set Up
NEXT NEXT
Menus and Settings Troubleshooting