Displaying Information (File No Display) - Contax I4R User Manual

Introduction
3
Use the D-connector cable to connect the
USB cradle holding the camera to the
television, then turn the television on.
A Important
4
Turn the camera on. (
Images are displayed on the television.
The table below shows the operations that can be performed during
playback.
Operation
Up
Left
Right
A Important
• The LCD monitor turns off while the D-connector cable is connected.
• Images may sometimes not be displayed correctly on a television.
BNote
[M] and [y] are displayed for movies and still images with postrecorded audio.

Displaying Information (File No Display)

«Applicable images: Still images / movies»
You can check information such as the filename and number of pixels of an
image during playback.
1
Press the 4-way button up while playing
back an image.
The information for the displayed image appears.
BNote
• Refer to p.22 for details of the screen displayed.
• Press the MENU button K when information is displayed to return to the normal
Contents Glossary
Getting Ready
Push the D3 connector cable on until the clips on
the right and left sides of the D3 video connector
click into place.
Description
Switches to the File No display.
( p.22)
Displays images in reverse order.
Displays images in forward order.
playback screen.
Index
Taking Pictures Playback
p.31)
EN-152
Nomenclature
Set Up
100–KICX_0001 2272X1704 2004.10.21 12:34:56
BACK NEXT
Menus and Settings Troubleshooting