To Set A User-Defined Screen (Single) - Contax I4R User Manual

Introduction
3
Press the 4-way button up or down to
select [SINGLE] or [MULTI], then press
the OK button E.
4
Press the 4-way button left to select the
CONTAX logo screen, then press the OK
button E.
The CONTAX logo screen is configured, and an example of the startup
screen is displayed for 1 second before returning to the SET UP menu
screen.
BNote
This setting is retained when you turn the camera off.

To set a user-defined screen (SINGLE)

A Important
Check that the memory card containing the images you want to use is inserted into the
camera.
1
Turn the camera on and press the mode
button until "G" lights up on the mode
select LED.
The SET UP menu screen is displayed.
2
Press the 4-way button up or down to
select [START SCREEN], then press right.
Contents Glossary
Getting Ready Taking Pictures
Index
Playback
EN-171
Nomenclature
Set Up
SELECT START SCREEN
SINGLE
MULTI
OFF
SELECT START SCREEN
SELECT IMAGE
OK
SET UP(2/3)
BEEP +2
SHUTTER VOL +2
START SCREEN SET
REC REVIEW 2SEC
ENGLISH
LANGUAGE
VIDEO OUT NTSC
BACK NEXT
Menus and Settings Troubleshooting
RESET