Printing Using Dpof Settings - Contax I4R User Manual

Introduction
3
Press the SCENE button I.
A message appears asking you to confirm that you want to print the
images.
To change print settings, see "Specifying the print settings" (
BNote
4
Press the 4-way button up to select
[EXECUTE], then press the OK button E.
Printing begins, and when printing is successfully completed, the print
completion screen appears.
A Important
BNote

Printing using DPOF settings

A Important
DPOF printing can only be used if DPOF settings have already been specified for the
images. (
1
In the print menu screen, press the 4-way
button up or down to select [DPOF
PRINTING] and then press the OK button
E.
The DPOF print screen appears.
Contents Glossary
Getting Ready Taking Pictures
Press the MENU button K to display the print
menu screen.
If an error occurs during printing, an error
message is displayed and printing stops. See
p.189 for information on the message displayed
and the correct response.
• You can specify the print settings by clicking the
SCENE button I before proceeding with this
step. (See steps 2 to 12 on p.127 for information
on the setting procedure.)
• During printing, a counter on the LCD monitor
displays the total number of prints and the
number of prints completed so far.
• Press the MENU button K to stop printing in
progress.
p.120)
Index
Playback
p.127).
EN-131
Nomenclature
Set Up
EXECUTE PRINT?
PRINT QTY. 1
PAPER SIZE 2L
PAPER TYPE PHOTO
BORDERLESS YES
DATE NOT PRINT
EXECUTE
CANCEL
PRINT MENU
SINGLE PRINT
PRINT MULTIPLE IMAGES
DPOF PRINTING
PRINT SETTINGS
BACK NEXT
Menus and Settings Troubleshooting