Viewing Image Information (File No/Information) - Contax I4R User Manual

Introduction
5
Press the OK button E to display the
zoom area movement screen.
Press the 4-way button up, down, left or right to scroll the image in that
direction.
Press the OK button E again to accept the selected magnification and
area and return to the playback screen (zoomed playback).
BNote
A Important
• Resized images cannot be viewed enlarged using zoomed playback.
• When you are enlarging images with a postrecording attached, perform this step while

Viewing Image Information (File No/INFORMATION)

«Applicable images: Still images / movies»
You can use the procedure below to check information such as the
aperture and shutter speed used to record an image.
1
Press the 4-way button up while the image is being displayed.
The information for the displayed image appears.
The screen changes in the following order each time you press the 4-way button up.
Normal
playback
A Important
For movies, pressing the 4-way button up only adjusts the audio volume, and does not
display any information. To view movie information, first display the information for a still
image, then press the 4-way button left or right to select the movie.
Contents Glossary
Getting Ready
• Scroll bars are displayed at the bottom and on the right side of the zoom area
movement screen. The scroll bars act as a guide to which part of the original image
is currently displayed.
• During zoomed playback, press the 4-way button left or right to move forwards or
backwards through the images while keeping the same magnification and area
selection.
the File No screen is displayed (
File Number
Display
100–KICX0001.JPG
Index
Taking Pictures Playback
p.85).
Information
display
INFORMATION
100 100–KICX0001.JPG 1600KB 100–KICX0001.JPG 1600KB KICX0001.JPG 1600KB
2272X1704 2272X1704 2272X1704
1/125 1/125 1/125 F2.8 F2.8 F2.8
ISO200 ISO200 ISO200
DPOF DPOF DPOF 0 PRTS 0 PRTS 0 PRTS
2004.10.21 12:34:56 2004.10.21 12:34:56 2004.10.21 12:34:56
EN-85
Nomenclature
Set Up
± 0.3 ± 0.3 0.3
BACK
Menus and Settings
CHANGE AREA
X4.0 X4.0 X4.0
CHANGE OK
NEXT
Troubleshooting