Viewing Images On A Windows Pc - Contax I4R User Manual

Introduction

Viewing images on a Windows PC

A Important
• If you are using Windows 98 or Windows 98SE, install the USB drivers before
• If you are using Windows Me, Windows 2000 or Windows XP, you do not need to install
• To view images on your PC, you must have image-viewing software already installed.
• Always use the AC adapter when you connect the camera to a computer to view and
1
Insert the memory card into the camera.
( p.28)
A Important
2
Place the camera in the USB cradle and
connect the AC adapter.
BNote
3
Use the USB cable supplied with the camera to connect the
USB cradle holding the camera to the PC, then start the PC.
A Important
Contents Glossary
Getting Ready
connecting the USB cable. (
the USB drivers. Connect the USB cable without installing the drivers.
(To play movies, QuickTime 4.1 or later is required.)
copy images, etc. If the battery runs out and the camera turns off, files may be
corrupted.
You cannot view images on the PC unless there is
a memory card in the camera.
Refer to "Using the USB Cradle" (
details on attaching the USB cradle.
Check the sizes of the USB connectors. Plug the small connector into the USB cradle
and the large connector into the USB port on your PC.
Index
Taking Pictures Playback
p.135)
p.36) for
EN-137
Nomenclature
Set Up
BACK NEXT
Menus and Settings Troubleshooting