Iso] Changing The Iso Sensitivity To Shoot Fast Moving Subjects - Contax I4R User Manual

Introduction
[ISO] Changing the ISO Sensitivity to Shoot Fast
Moving Subjects
«Applicable mode: C»
The [ISO] setting corresponds to the ISO value of conventional film and
indicates sensitivity to light.
The ISO sensitivity options in this mode are [AUTO], [50], [100], [200] and
[400]. The default setting is [AUTO], in which case the camera
automatically chooses the ISO sensitivity to suit the ambient conditions.
Although images become coarse for higher values, the sensitivity to light
is better, allowing you to take shots in dark locations and use the high-
speed shutter. This also slightly increases the effective range of the flash.
1
Turn the camera on and press the mode
button until "C" lights up on the mode
select LED.
2
Press the MENU button K to display the menu icons.
3
Press the 4-way button left or right to
select ISO [K] and press the OK button
E.
4
Press the 4-way button up or down to
select the desired sensitivity and press
the OK button E.
The ISO sensitivity is now set.
(No icon) [AUTO] : The camera sets the ISO sensitivity to suit the
[ISO50] [50] : Fixed at ISO 50
[ISO100] [100] : Fixed at ISO 100
[ISO200] [200] : Fixed at ISO 200
[ISO400] [400] : Fixed at ISO 400
Contents Glossary
Getting Ready Taking Pictures
ambient conditions. (Default)
Index
Playback
EN-66
Nomenclature
Set Up
AUTO
BACK NEXT
Menus and Settings Troubleshooting
ISO
50
100
200
400