Rec Review] Checking Images Right After You Shoot Them - Contax I4R User Manual

Introduction

[REC REVIEW] Checking Images Right After You Shoot Them

«Applicable mode: C»
Use this procedure to have the camera display images for several seconds
immediately after you shoot them.
1
Turn the camera on and press the mode
button until "G" lights up on the mode
select LED.
2
Press the 4-way button up or down to
select [REC REVIEW], then press right.
3
Press the 4-way button up or down to
select the desired number of seconds and
press the OK button E.
This sets the number of seconds to show images.
[2SEC] : The photographed image is displayed for 2 seconds right after
shooting. (Default)
[4SEC] : The photographed image is displayed for 4 seconds right after
shooting.
[OFF] : The photographed image is not displayed right after shooting.
A Important
This setting is retained when you turn the camera off.
Contents Glossary
Getting Ready Taking Pictures
Index
Playback
EN-176
Nomenclature
Set Up
SET UP(2/3)
BEEP +2
SHUTTER VOL +2
START SCREEN SET
REC REVIEW 2SEC
LANGUAGE ENGLISH
VIDEO OUT NTSC
SET UP(2/3)
BEEP +2
SHUTTER VOL SHUTTER VOL +2
START SCREEN START SCREEN 2SEC 2SEC
REC REVIEW REC REVIEW 4SEC 4SEC
LANGUAGE OFF OFF
VIDEO OUT NTSC
Menus and Settings Troubleshooting