Af Mode] Still And Moving Subjects - Contax I4R User Manual

Introduction

[AF MODE] Still and Moving Subjects

«Applicable mode: C/M»
This setting selects the method the camera uses to automatically set the
focus.
[SAF] : (Single Auto Focus) (Default): Best for normal photography.
The camera sets the focus when you press the shutter release button half way. When the shot is
focused, the green shooting mark appears to show that focus and exposure are set. Continue pressing
the shutter release button down fully to take the shot.
[CAF] : (Continuous Auto Focus): Best for moving subjects.
While the camera is turned on, it continuously adjusts the focus. With the shutter release button
pressed half way down, check that the shooting mark is shown and then simply press the shutter
release button down fully to take the shot.
1
Turn the camera on and press the mode
button until "G" lights up on the mode
select LED.
2
Press the 4-way button up or down to
select [AF MODE], then press right.
3
Press the 4-way button up or down to
select the desired AF mode and press the
OK button E.
The AF mode is now set.
A Important
• This setting is retained when you turn the camera off.
• Even when [CAF] is selected, the auto focus may not be able to successfully track some
• Selecting [CAF] uses up battery power more quickly.
Contents Glossary
Getting Ready
fast-moving subjects.
Index
Taking Pictures Playback
EN-74
Nomenclature
Set Up
SET UP(1/3)
AF MODE SAF
FORMAT EXECUTE
BRIGHT CNTRL STANDARD
DATE 2004.01.01
INSERT DATE NO DATE
POWER SAVE 1MIN.
SET UP(1/3)
AF MODE SAF
FORMAT CAF
BRIGHT CNTRL BRIGHT CNTRL STANDARD
DATE 2004.01.01
INSERT DATE NO DATE
POWER SAVE 1MIN.
BACK
Menus and Settings Troubleshooting