Table of Contents
Advertisement
Display of Remaining
Battery Capacity
Battery
Prepare for
capacity is
new battery
enough.
(Blinks)
(Blinks)
Replace the
Ran down
battery with
the battery
new one
capacity
<Battery Replacement>
You should replace the battery when " p " mark
appears on the display panel. Turn the main
switch off, replace the battery with new one.
28
• When you take out the battery from the camera,
replace the new battery immediately. If you leave
the battery out for more than thirty seconds, the
date and time will reset. If this happens, then
please reset the date and time.
• Although you can take pictures even after" p "
mark blinks, you should replace the battery as soon
as possible. If the battery capacity drops below the
effective limit,''
j]
" mark on the display panel
blinks and the camera will no longer operate.
• The voltage of some batteries may temporarily
decrease causing " Q " mark to blink when loaded
in the camera. If "p " mark blinks soon after new
battery is loaded, turn the main switch off and back
on again. If " | " mark does appear again, you can
use the battery.
Advertisement
Table of Contents
