Connecting To A Television; Use The Video Out Port To Connect To The Television" - Contax I4R User Manual

Introduction

Connecting to a Television

«Use the VIDEO OUT port to connect to the
television»
You can view the images taken with the camera on a television. You can
view images you have taken on a television while you are traveling or at
your home.
1
Insert the memory card into the camera.
( p.28)
A Important
2
Place the camera in the USB cradle and
connect the AC adapter.
A Important
BNote
3
Use the supplied video cable to connect
the USB cradle holding the camera to the
television, then turn the television on.
4
Turn the camera on (
the mode button until "P" lights up on the
mode select LED.
Images are displayed on the television.
The shooting, playback and SET UP functions are enabled in this state.
Contents Glossary
Getting Ready Taking Pictures
You cannot view images on the television unless
there is a memory card in the camera.
Turn the camera and television off before
connecting them.
Refer to "Using the USB Cradle" (
details on attaching the USB cradle.
p.31) and press
Index
Playback
p.36) for
EN-149
Nomenclature
Set Up
NEXT
Menus and Settings Troubleshooting