Beep] Adjusting The Volume Of The Camera Button Beep - Contax I4R User Manual

Introduction

[BEEP] Adjusting the Volume of the Camera Button Beep

Use this procedure to adjust the volume of the beep emitted when a camera
button is pressed or the camera is turned on.
1
Turn the camera on and press the mode
button until "G" lights up on the mode
select LED.
2
Press the 4-way button up or down to
select [BEEP], then press right.
3
Press the 4-way button up or down to
select the desired volume, then press the
OK button E.
The selected volume is applied.
[+3] : Maximum volume
[+2] : Medium volume (Default)
[+1] : Low volume
[OFF] : No button beep
BNote
This setting is retained when you turn the camera off.
Contents Glossary
Getting Ready Taking Pictures
Index
Playback
EN-168
Nomenclature
Set Up
SET UP(2/3)
+ 2
BEEP
+ 2
SHUTTER VOL
START SCREEN SET
REC REVIEW 2SEC
LANGUAGE
ENGLISH
VIDEO OUT NTSC
SET UP(2/3)
+ 3
BEEP
+ 2
SHUTTER VOL
+ 1
START SCREEN
REC REVIEW OFF
LANGUAGE ENGLISH
VIDEO OUT NTSC
Menus and Settings Troubleshooting