Introduction
Setting the Flash Mode
1
Turn the camera on and press the mode
button until "C" lights up on the mode
select LED.
2
Press the 4-way button up to select the
icon for the mode you want to set.
The flash mode icon changes in the cycle shown below each time you
press the 4-way button up.
(Default)
BNote
This setting reverts to the default value when you turn the camera off.
Contents
Glossary
Getting Ready
Taking Pictures
Index
Playback
EN-61
Nomenclature
Set Up
BACK
NEXT
Menus and Settings
Troubleshooting