Tips For Erasing Images Using [Protect] And [Erase All] - Contax I4R User Manual

Introduction Getting Ready

Tips for Erasing Images Using [PROTECT] and [ERASE ALL]

For example, if you have 100 recorded images and you only want to keep 5 or 6 of them, using [ERASE] or
[SELECT AND ERASE] to erase individual images can be very time-consuming.
In a situation like this, where you have a large number of recorded images and you only want to keep a few
of them, you can accomplish it in just a few steps using [PROTECT] and [ERASE ALL].
1
First protect the images you want to keep. ( "[U] Protecting Images from
Accidental Erasing (PROTECT)"
2
Then erase all the images. ( "Erasing all the images (ERASE ALL)"
All the unprotected images are erased, leaving just the protected images behind.
Contents Glossary
Taking Pictures
p.104)
EN-106
Index
Playback
BACK
Nomenclature Menus and Settings
Set Up
p.103)
Troubleshooting