P ] Adding Sounds To Still Images (Postrecording); Recording A Message - Contax I4R User Manual

Introduction
[p] Adding Sounds to Still Images (POSTRECORDING)
«Applicable images: Still images only»
This feature allows you to add recorded voice messages to photographed
images.
BNote
• These settings can also be used in MULTI playback / GROUP playback modes
• Postrecorded audio is saved in the same folder as the image file, but with a different file

Recording a message

1
Turn the camera on and press the mode
button until "P" lights up on the mode
select LED.
2
Press the MENU button K to display the menu icons.
3
Press the 4-way button left or right to
select POSTRECORDING [p] and press the
OK button E.
4
Press the 4-way button left or right to select the image to
which you want to add the voice message.
Contents Glossary
Getting Ready
( p.87).
extension, as shown below.
DCIM
100CXBOX
Index
Taking Pictures Playback
KICX0001.jpg
KICX0002.jpg
KICX0002.wav
KICX0003.jpg
•
•
•
EN-107
Nomenclature
Set Up
Image file that has had audio attached
Recorded audio file
POSTRECORDING
Menus and Settings
NEXT
Troubleshooting