Startup Mode] Setting The Mode The Camera Starts In - Contax I4R User Manual

Introduction

[STARTUP MODE] Setting the Mode the Camera Starts In

The camera can be set to always start in still image mode when turned on,
or to start in the same mode as the last time it was turned off.
1
Turn the camera on and press the mode
button until "G" lights up on the mode
select LED.
2
Press the 4-way button up or down to
select [STARTUP MODE], then press right.
3
Press the 4-way button up or down to
select the desired mode, then press the
OK button E.
The selected setting is applied.
[STILL] : The camera switches to still image mode when it is turned on.
(Default)
[LOCK] : When you turn the camera on, the camera uses the mode
used last time the power was turned off.
BNote
This setting is retained when you turn the camera off.
Contents Glossary
Getting Ready Taking Pictures
Index
Playback
EN-179
Nomenclature
Set Up
SET UP(3/3)
STARTUP MODE STILL
DISPLAY INFO ON
FILE NO. EXECUTE
MODE RESET EXECUTE
SET UP(3/3)
STARTUP MODE STARTUP MODE STILL
DISPLAY INFO DISPLAY INFO LOCK LOCK
FILE NO. FILE NO. EXECUTE EXECUTE
MODE RESET MODE RESET EXECUTE EXECUTE
Menus and Settings Troubleshooting