Contax I4R User Manual page 158

Introduction
[J] Erasing individual images (ERASE)
«Applicable images: Still images / movies»
Use the procedure below to erase a single image.
A Important
• You cannot erase protected images (
• When you erase an image with a postrecorded voice message (
1
Press the MENU button K during playback to display the
menu icons.
2
Press the 4-way button down to select
ERASE [J] and press the OK button E.
3
Press the 4-way button left or right to select the image you
want to erase.
4
Press the 4-way button up to select
[EXECUTE], then press the OK button
E.
The image is erased and the next image appears.
If there are no further images, the "NO IMAGE" message appears.
BNote
5
Press the MENU button K.
Contents Glossary
Getting Ready
file is also erased.
To erase another image, repeat steps 3 and
4.
Index
Taking Pictures Playback
p.104).
EN-158
Nomenclature
Set Up
p.107), the sound
ERASE
EXECUTE
CANCEL
BACK
Menus and Settings Troubleshooting
RETURN