Contax I4R User Manual page 79

Introduction
5
Position your prepared white sample so
that it fills the frame on the screen.
6
Press the 4-way button up to select [SET], then press the OK
button E.
The preset value for the white balance is set.
To cancel this setting, select [CANCEL] and press the OK button E.
7
Press the MENU button K.
The white balance is set to [u].
A Important
This setting is retained when you turn the camera off.
BNote
In Sunset mode, Twilight mode, Black and White mode, and Sepia mode, the white
balance is automatically configured as suitable for the mode and cannot be changed.
Contents Glossary
Getting Ready Taking Pictures
Index
Playback
White subject,
such as paper.
EN-79
Nomenclature
Set Up
PRESET WB?
SET
CANCEL
Adjust the subject to fill
the frame on the screen.
BACK NEXT
Menus and Settings Troubleshooting