Display Info] Choosing The Information Displayed On The Screen - Contax I4R User Manual

Introduction
[DISPLAY INFO] Choosing the Information
Displayed on the Screen
In "C" and "M" modes, a large number of icons are displayed on the LCD
monitor. If you find the icons annoying when you are shooting, it is
possible to change the display to make the screen easier to view.
1
Turn the camera on and press the mode
button until "G" lights up on the mode
select LED.
2
Press the 4-way button up or down to
select [DISPLAY INFO], then press right.
3
Press the 4-way button up or down to
select the display style, then press the
OK button E.
The selected setting is applied.
[ON] : Icons for all of the current settings are displayed on the screen.
(Default)
[OFF] : Only the Flash mode, Macro/Landscape mode, Scene mode,
Digital Zoom Magnification and Date are displayed.
BNote
This setting is retained when you turn the camera off.
Contents Glossary
Getting Ready Taking Pictures
Index
Playback
EN-180
Nomenclature
Set Up
SET UP(3/3)
STARTUP MODE STILL
DISPLAY INFO ON
FILE NO. EXECUTE
MODE RESET EXECUTE
SET UP(3/3)
STARTUP MODE STARTUP MODE STILL
DISPLAY INFO DISPLAY INFO ON ON
FILE NO. FILE NO. OFF OFF
MODE RESET MODE RESET EXECUTE EXECUTE
Menus and Settings Troubleshooting