J]/[I] Erasing Unwanted Images; Erasing Individual Images (Erase) - Contax I4R User Manual

Introduction

[J]/[I] Erasing Unwanted Images

«Applicable images: Still images / movies»
There are 3 methods for erasing images recorded on a memory card:
• [ERASE]
• [SELECT AND ERASE] : Erases the images you have selected.
• [ERASE ALL]
BNote
You can also erase images from the MULTI playback / GROUP playback screen (
and Quickview screen (

Erasing individual images (ERASE)

Use the procedure below to erase a single image.
A Important
• You cannot erase protected images (
• Images are displayed as thumbnails in MULTI playback / GROUP playback modes.
• When you erase an image with a postrecorded voice message (
• There are no camera functions to restore an image once it has been erased. When
• When you erase a single image from within a group of continuous images, the group
1
Turn the camera on and press the mode
button until "P" lights up on the mode
select LED.
2
Press the MENU button K to display the menu icons.
3
Press the 4-way button left or right to
select ERASE [J] and press the OK
button E.
Contents Glossary
Getting Ready
: Erases just one image.
: Erases all the images on the card.
When erasing continuous shooting images in MULTI playback mode, take care not to
mistakenly erase images that you want to keep.
file is also erased.
erasing, take care that you do not erase images that you want to keep.
splits into 2 groups of continuous images.
Index
Taking Pictures Playback
p.50).
p.104).
EN-100
Nomenclature
Set Up
p.107), the sound
ERASE
NEXT
Menus and Settings Troubleshooting
p.87)