Setting The Date; Date] Setting The Date And Time; Insert Date] Adding The Date To Images - Contax I4R User Manual

Introduction

Setting the Date

[DATE] Setting the Date and Time

Setting the Date and Time. Refer to p.34 for details.

[INSERT DATE] Adding the Date to Images

You can choose to imprint the date on images.
1
Turn the camera on and press the mode
button until "G" lights up on the mode
select LED.
2
Press the 4-way button up or down to
select [INSERT DATE], then press right.
3
Press the 4-way button up or down to
select [NO DATE] or [WITH DATE], then
press the OK button E.
The selected setting is applied.
A Important
If you set [DATE] to [PRINT] in [DPOF] (
with [INSERT DATE] set to [WITH DATE], the date will appear twice on the prints.
Contents Glossary
Getting Ready Taking Pictures
Index
Playback
p.120), then print photographs that were shot
EN-163
Nomenclature
Set Up
2004.10.21
SET UP(1/3)
AF MODE SAF
FORMAT EXECUTE
BRIGHT CNTRL STANDARD
DATE 2004.01.01
INSERT DATE NO DATE
POWER SAVE 1MIN.
SET UP(1/3)
AF MODE SAF
FORMAT EXECUTE
BRIGHT CNTRL STANDARD
DATE 2004.01.01
INSERT DATE NO DATE
POWER SAVE WITH DATE
NEXT
Menus and Settings Troubleshooting