Turning The Startup Screen Off - Contax I4R User Manual

Introduction

Turning the startup screen off

1
Turn the camera on and press the mode
button until "G" lights up on the mode
select LED.
2
Press the 4-way button up or down to
select [START SCREEN], then press right.
3
Press the 4-way button down to select
[OFF], then press the OK button E.
The startup screen is set to [OFF] and the SET UP menu screen
reappears.
BNote
This setting is retained when you turn the camera off.
Contents Glossary
Getting Ready Taking Pictures
Index
Playback
EN-175
Nomenclature
Set Up
SET UP(2/3)
BEEP +2
SHUTTER VOL +2
START SCREEN SET
REC REVIEW 2SEC
LANGUAGE ENGLISH
VIDEO OUT NTSC
SELECT START SCREEN
SINGLE
MULTI
OFF
BACK
Menus and Settings Troubleshooting