Using Continuous Shooting Mode - Contax I4R User Manual

Introduction

Using Continuous Shooting Mode

«Applicable mode: C»
This camera is capable of taking a series of consecutive shots at up to
approximately 3.0 frames per second.* This feature is useful for
photographing moving subjects and for situations where you do not want
to miss a snapshot opportunity. Select AF continuous to refocus the
camera for each frame while shooting continuously.
* When using a high speed memory card (an SD Memory Card with a writing speed of 10MB/S or more).
1
Turn the camera on and press the mode
button until "C" lights up on the mode
select LED.
2
Press the continuous shooting button N
to select continuous shooting mode.
The shooting mode changes as shown below each time the continuous
shooting button N is pressed.
(No icon)
Single-shot
(No icon) (Single-Shot)
[F] (Continuous Shooting)
[A] (AF Continuous Shooting) : Continuous shooting with focus set for each frame. This reduces
Contents Glossary
Getting Ready Taking Pictures
N
F
Continuous
Shooting
N
: Standard shooting mode. (Default)
: A series of photos can be shot continuously. (Approximately 3.0
frames per second)
the continuous shooting speed. (Approximately 1.4 frames per
second)
Index
Playback
N
A
AF Continuous
Shooting
EN-43
Nomenclature
Set Up
NEXT
Menus and Settings Troubleshooting