Video Out] Setting The Output Format For A Tv Connection - Contax I4R User Manual

Introduction

[VIDEO OUT] Setting the Output Format for a TV Connection

You can choose between NTSC and PAL video output formats when the
camera is connected to a television through the VIDEO OUT port on the
USB cradle. Different TV signal formats are used in different countries.
When you are on holiday, you should configure the video output to match
the format for your destination country.
BNote
If the D connector cable is connected, the camera will automatically switch to D3 output
format regardless of this setting.
1
Turn the camera on and press the mode
button until "G" lights up on the mode
select LED.
2
Press the 4-way button up or down to
select [VIDEO OUT], then press right.
3
Press the 4-way button up or down to
select the video output format, then press
the OK button E.
The selected setting is applied.
[NTSC]: Video output format used in, for instance, Japan and the U.S..
(Default)
[PAL] : Video output format used mostly in Europe.
BNote
This setting is retained when you turn the camera off.
Contents Glossary
Getting Ready Taking Pictures
Index
Playback
EN-178
Nomenclature
Set Up
SET UP(2/3)
+ 2
BEEP
+ 2
SHUTTER VOL
START SCREEN SET
REC REVIEW 2SEC
LANGUAGE ENGLISH
VIDEO OUT NTSC
SET UP(2/3)
+ 2
BEEP
+ 2
SHUTTER VOL
START SCREEN SET
REC REVIEW 2SEC
NTSC
LANGUAGE
VIDEO OUT PAL
Menus and Settings Troubleshooting