When The Memory Card Is Full - Contax I4R User Manual

Introduction
4
Press the shutter release button down
fully.
The camera emits the shutter sound and takes a picture.
BNote
A Important
For subjects that are closer than 60 cm to the camera, use macro mode to take the shot.
(

When the Memory Card is Full

When you cannot record any more images on a memory
card, the "MEMORY CARD FULL" message appears on the
LCD monitor. When this happens, try the following:
• Erase any unwanted images.
• Save your images onto a PC and then erase the images
stored on the memory card.
• Insert another memory card that has some available
space.
To erase images on a memory card, you can use [ERASE], [ERASE MULTIPLE] ([SELECT AND ERASE]
or [ERASE ALL]) or [FORMAT]. For more information on erasing images, see p.100. For more information
on formatting memory cards, see p.161.
To save images to a personal computer, use the USB cable provided. Refer to "Connecting to a Windows
PC" ( p.134) or "Connecting to a Macintosh" (
Contents Glossary
Getting Ready Taking Pictures
You can adjust the volume of the shutter sound.
( p.169)
p.55)
Index
Playback
p.144) for details.
EN-41
Nomenclature
Set Up
Click
2 2 7 2
MEMORY CARD FULL
BACK NEXT
Menus and Settings Troubleshooting
0