Erasing All The Images (Erase All) - Contax I4R User Manual

Introduction

Erasing all the images (ERASE ALL)

You can use the procedure below to erase all the images recorded on a
memory card.
A Important
• You cannot erase protected images (
• When you erase an image with a postrecorded voice message (
1
Turn the camera on and press the mode
button until "P" lights up on the mode
select LED.
2
Press the MENU button K to display the menu icons.
3
Press the 4-way button left or right to
select ERASE MULTIPLE [I] and press
the OK button E.
The multiple erase screen appears.
4
Press the 4-way button up or down to
select [ERASE ALL], then press the OK
button E.
A message appears asking you to confirm that you want to erase the
images.
5
Press the 4-way button up to select
[EXECUTE], then press the OK button E.
All the images are erased and the "NO IMAGE" message appears.
A Important
Contents Glossary
Getting Ready
file is also erased.
If there are images still shown after you use
[ERASE ALL], those images may be protected. To
forcibly erase all the images, format the memory
card. ( "[FORMAT] Initializing a Memory Card"
p.161)
Index
Taking Pictures Playback
p.104).
EN-103
Nomenclature
Set Up
p.107), the sound
ERASE MULTIPLE
ERASE MULTIPLE
SELECT AND ERASE
ERASE ALL
RETURN
ERASE ALL?
EXECUTE
CANCEL
BACK
Menus and Settings Troubleshooting