Selecting Scenes To Automatically Set The Focus And Flash; Selecting The Scene Mode - Contax I4R User Manual

Introduction

Selecting Scenes to Automatically Set the Focus and Flash

The camera can be set to the optimal shooting settings for any subject.

Selecting the Scene Mode

«Applicable mode: C»
1
Turn the camera on and press the mode
button until "C" lights up on the mode
select LED.
2
Press the SCENE button I.
The scene mode menu is displayed.
3
Press the 4-way button up, down, left or
right to choose the appropriate scene
mode for the subject.
Refer to p.53 for details on each of the scene modes.
4
Press the OK button E.
The scene mode is set. You can now shoot using the selected mode.
A Important
• This setting is retained when you turn the camera off.
• Each time you change the scene mode, the focus, flash and other camera settings are
Contents Glossary
Getting Ready
reset to the default settings for the new mode.
Index
Taking Pictures Playback
EN-52
Nomenclature
Set Up
SCENE MODE
SPORTS ACTION
CANCEL
NEXT
Menus and Settings Troubleshooting