Playback On A Television That Supports D3 Or Higher Video Input" - Contax I4R User Manual

Introduction
«Playback on a television that supports D3
or higher video input»
You can view the pictures taken with the camera on a television that
supports D3 or higher video input. You can get more detailed images by
connecting the television to the D3 video output connector instead of the
VIDEO OUT port.
About the D connector
The D connector is a standardized video connector component that supports digital tuners, DVD players, etc.
This camera offers 1080 scan line resolution. You can view images on a television by connecting the camera to
a D3 or D4 video input port (D3 video is displayed even if the camera is connected to a D4 video input port).
You cannot view images on a television using a D1 or D2 video input connector.
A Important
• Connection to a television supporting D3 or higher video input is only available within
• You cannot use shooting or SET UP functions while connected to a television via a D3
• You cannot playback movies or postrecorded audio while playing back on a television
1
Insert the memory card into the camera.
( p.28)
A Important
2
Place the camera in the USB cradle and
connect the AC adapter.
A Important
BNote
Contents Glossary
Getting Ready
Japan. This cannot be used in foreign countries.
or higher video input connector.
using a D3 or higher video input connector. Only the first frame of movies will be shown.
You cannot view images on the television unless
there is a memory card in the camera.
Turn the camera and television off before
connecting them.
Refer to "Using the USB Cradle" (
details on attaching the USB cradle.
Index
Taking Pictures Playback
p.36) for
EN-151
Nomenclature
Set Up
BACK NEXT
Menus and Settings Troubleshooting