Viewing Still Images - Contax I4R User Manual

Introduction

Viewing Still Images

«Applicable images: Still images only»
1
Turn the camera on and press the mode
button until "P" lights up on the mode
select LED.
The last image shot appears on the LCD monitor.
2
Press the 4-way button left or right to
select the image to view.
The table below shows the operations that can be performed during playback.
Operation
Up
Down
Left
Right
OK button E
SCENE button I
Continuous shooting
button N
BNote
• Any resized images are displayed before the normal images.
• Resized images are displayed at different sizes depending on the image size. When this
Contents Glossary
Getting Ready
Switches to the File No display and the information display. (
Erases the image. (
Displays images in reverse order. Hold the 4-way button left for more than
one second to scroll through the images at high speed.
Displays images in forward order. Hold the 4-way button right for more
than one second to scroll through the images at high speed.
Enlarges the image for playback. (
Protects the image. (
Plays back the group of continuous shots if the image belongs to a group
of continuous shots. (
occurs, the resize icon [V] appears in the top-left corner of the LCD monitor. For more
information on resizing images, see "[V] Resizing and Trimming Images (RESIZE)"
( p.111).
Index
Taking Pictures Playback
Description
p.100)
p.104)
p.91)
EN-83
Nomenclature
Set Up
p.84)
Menus and Settings
p.85)
NEXT
Troubleshooting