Using The Accessories; Using The Usb Cradle - Contax I4R User Manual

Introduction

Using the Accessories

Using the USB Cradle

Use the USB cradle to charge the battery pack and to connect to a
computer, printer, television or television that supports D3 or higher video
input (Japan only).
A Important
Make sure the camera is turned off when attaching it to or removing it from the USB
cradle.
Placing the camera in the USB cradle.
Place the camera in the cradle in the direction shown in the illustration.
A Important
Removing the camera from the USB cradle.
Take the camera and remove it from the USB cradle as shown in the
illustration.
A Important
Do not remove the camera from the USB cradle while the camera is communicating with a
PC or other device. Doing so may corrupt the files on the memory card, or even damage
the camera.
Contents Glossary
Getting Ready Taking Pictures
Do not insert the camera the wrong way around.
Inserting the camera in the wrong direction may
damage the camera or cradle.
Index
Playback
EN-36
Nomenclature
Set Up
NEXT
Menus and Settings Troubleshooting