Unprotecting An Image - Contax I4R User Manual

Introduction
6
Press the MENU button K.
A Important
[ERASE ALL] (
(
BNote
In SINGLE playback mode, press the SCENE button I to view the protection settings
screen. Press the 4-way button up to select [SET] and press the OK button E to protect
the currently displayed image.

Unprotecting an image

1
Turn the camera on and press the mode
button until "P" lights up on the mode
select LED.
2
Press the MENU button K to display the menu icons.
3
Press the 4-way button left or right to
select PROTECT [U] and press the OK
button E.
4
Press the 4-way button left or right to select the image to be
unprotected.
The [U] icon is displayed with protected images.
5
Press the 4-way button up to select
[EXECUTE], then press the OK button E.
The image protection is removed.
BNote
6
Press the MENU button K.
Contents Glossary
Getting Ready Taking Pictures
p.103) does not erase protected images. However, [FORMAT]
p.161) erases all of the images on the card, including protected images.
• To unprotect another image, repeat steps 4 and
5.
• In GROUP playback, all of the images in a
group of continuous shots are unprotected when
you unprotect an image from a group.
Index
Playback
EN-105
Nomenclature
Set Up
PROTECT
UNPROTECT?
EXECUTE
RETURN
BACK NEXT
Menus and Settings Troubleshooting