Contax I4R User Manual page 155

Introduction
6
Press the 4-way button up or down to
select [START FRAME], then press
right.
7
Press the 4-way button up or down to
select the starting image, then press
the OK button E.
[THIS FRAME] : Starts playback from the currently displayed
image.
[1ST FRAME] : Starts playback from the image with the lowest
number in the file name.
8
Press the 4-way button up or down to
select [EFFECT], then press right.
9
Press the 4-way button up or down to
select the desired effect, then press
the OK button E.
[OFF] : No effect is set.
[FADE] : The current image gradually darkens (fades out)
and the next image gradually fades in.
[OVERLAP] : The next image slides over the current image and
replaces it.
[SHUTTER] : Black curtains close from the top and bottom of the
screen to erase the current image, after which the
black curtains open again towards the top and
bottom to reveal the next image.
[WIPE] : The current image disappears as if wiped away
from the left and is replaced by the next image.
10
Press the MENU button K.
Contents Glossary
Getting Ready Taking Pictures
Index
Playback
EN-155
Nomenclature
Set Up
SETTING AUTO PLAY
INTERVAL 2SEC
START FRAME THIS FRAME
EFFECT OFF
RETURN
SETTING AUTO PALY
INTERVAL 2SEC
THIS FRAME
START FRAME
1ST FRAME
EFFECT
RETURN
SETTING AUTO PLAY
INTERVAL 2SEC
START FRAME THIS FRAME
EFFECT OFF
RETURN
OFF
SETTING AUTO PLAY
FADE
INTERVAL
OVERLAP
START FRAME
SHUTTER
EFFECT
RETURN WIPE
BACK NEXT
Menus and Settings Troubleshooting