Erasing A Recorded Message - Contax I4R User Manual

Introduction

Erasing a recorded message

Use the procedure below to erase a postrecorded voice message.
1
Turn the camera on and press the mode
button until "P" lights up on the mode
select LED.
2
Press the MENU button K to display the menu icons.
3
Press the 4-way button left or right to
select POSTRECORDING [p] and press the
OK button E.
4
Press the 4-way button left or right to select the image with
the voice message you want to erase.
5
Press the 4-way button up to select
[EXECUTE], then press the OK button E.
The voice message is erased and the "RECORD SOUND?" message
appears.
6
Press the MENU button K.
A Important
Audio cannot be erased from protected images.
Contents Glossary
Getting Ready Taking Pictures
Index
Playback
EN-110
Nomenclature
Set Up
POSTRECORDING
ERASE SOUND?
EXECUTE
CANCEL
BACK
Menus and Settings Troubleshooting