Video Setup Menu - Sony PCS-XG80 Operating Instructions Manual

Off: Transmits the audio with right and left
not reversed.
On: Transmits the audio with right and left
reversed.
Audio Input Delay Setting
Allows you to set Audio Input Delay to
synchronize the audio with the video input.
Default –100ms: Selects the default delay
minus 100ms.
Default –50ms: Selects the default delay
minus 50ms.
Default: Selects the default delay.
Default + 50ms: Selects the default delay
plus 50ms.
Default + 100ms: Selects the default delay
plus 100ms.
Custom: Uses the Audio Input Delay you
set.
Audio Input Delay
When you set "Audio Input Delay Setting"
to "Custom", you can set the delay time of
the input audio to match the image and
audio.
Audio Output Delay Setting
Allows you to set Audio Output Delay to
synchronize the audio with the video output.
Default –100ms: Selects the default delay
minus 100ms.
Default –50ms: Selects the default delay
minus 50ms.
Default: Selects the default delay.
Default + 50ms: Selects the default delay
plus 50ms.
Default + 100ms: Selects the default delay
plus 100ms.
Custom: Uses the Audio Output Delay you
set.
Audio Output Delay
When you set "Audio Output Delay Setting"
to "Custom", you can set the delay time of
the output audio to match the image and
audio.
REC OUT Mode
Stereo: The mixed sounds of the remote and
local sites are output from the REC OUT
R and L jacks in stereo.
Monaural 2ch: The sounds of the remote
and local sites are output from the REC
OUT R and L jacks separately.
Audio3
Sound Effect
Beep Sound
Allows you to select whether the system
beeps each time you press a button on the
Remote Commander.
You can select from among "Large",
"Medium", "Small" and "Off".
Sound Effect
Allows you to select whether to output
sounds when the system starts, connection
starts or it is disconnected.
You can select from among "Large",
"Medium", "Small" and "Off".
Dial Tone
Allows you to select whether to output a
ring-back and busy tones when you are
dialing.
You can select from among "Large",
"Medium", "Small" and "Off".
Ringer Tone
Allows you to select whether to output a
ringer tone when you receive a call.
You can select from among "Large",
"Medium", "Small" and "Off".

Video Setup Menu

The Video setup menu is used to set up video
input/output.
Video1
Basic Setup
Video Input
Allows you to select the video input.
Camera: Selects the camera picture from
the camera connected to the CAMERA
connector.
RGB: Selects the video signal from the
external equipment connected to the
RGB IN connector.
Registering Local Information
71