Setting Up the System Immediately
after the Installation — Initial Setup
When you turn on the Communication System for the first time after
installation and the self-diagnosis is completed, the setup wizard appears on
the monitor screen. Register your local system data with the setup wizard using
the Remote Commander.
• You can change the settings made with the setup wizard later using the setup menus.
• The setup wizard will also be displayed when you install the PCSA-B384S or PCSA-
B768S ISDN Unit to your system later. Perform the setup again.
Back to Tools
To select the on-screen language
Use the V, v, B or b button on the Remote Commander to select "Select
Language" in the setup wizard, then press the ENTER button.
Setting Up the System Immediately after the Installation — Initial Setup Wizard
Set Region and Clock
Select Line I/F
Set up LAN
Set up ISDN
Set up SIP
Select the on-screen language.